Will It Give You Better Fit?
I saw a question about why we don’t do an unequal divide of the bodies of knitted garments. Logically, it would seem to make perfect sense to have an unequal divide, with more fabric in the front because of boobs. But does it?
10/24/2024: Edited to fix hourglass hip and trapezoid waist measurements.
tl;dr (reading time approximately 5 minutes–but there are drawings!)
Setting the scene for talking about why we don’t usually unevenly divide garments in knitting, even though it seems kind of logical and necessary.
Generally, Why We Don’t Do An Unequal Divide
Such a good question, and I’m going to try to answer it! First a few clarifications.
- The front does not necessarily occupy more space than the back.
- Knowing the measurements and body type underlying the design is essential.
- Doing an unequal divide will require more time and effort for the designer/pattern writer and is likely not financially viable.
- An uneven divide requires some changes to the armhole and sleeve cap.
Let’s make sure we are all looking at bodies and sizing from the same perspective before we dive deeper. I’ve drawn three figures that would potentially wear the same size, based on personal preference and bust measurements.
The three body types I have shown below all have the same bust measurement, but obviously different kinds and amounts of breast tissue. The waist and hip measurements show significant differences for each body type. Let’s assume there is 5″ / 12.7 cm of ease at the bust/chest circumference for a total garment circumference of 44″ / 111.8 cm. That circumference will not actually fit around the hip of the Trapezoid — and in a side view we can’t see the width of the hip.
- The colored rectangles are a simple garment shape, without any shaping to the upper body.
- Two arrowed lines on each rectangle represent the even divide of the garment, the garment is aligned to the imaginary side seams.
- Red dotted vertical lines are the imaginary seams on the body.
- The horizontal red dotted line would be the underarm of the body.
- My drawings don’t show any body changes due to aging.

Bodies Are Individual
To accomplish what we know as ready-to-wear (RTW), bodies are standardized and averaged. Knitting patterns are ready-to-wear and meant to fit an “average” body. I will use average throughout this discussion, but that in no way means that “average” equals “ideal”, “correct”, “better”; it just means that from the pool of bodies, these are the averages.
There Are Multitudes of Body Types
For the purposes of RTW the average body type has been hourglass. There is tons of baggage with that choice, which I do not defend, just state as fact. I have several different body types I consider, but it is complicated and becomes even more complicated when trying to attach measurements!
Averages Are Good, And Not-so-good
Averages make things accessible, but not necessarily inclusive! Let’s say you want to design for a busty figure which would need an uneven divide of fabric. Unless you are willing to design for each body individually (couture vs RTW), you have to use averages. By choosing a body type to focus on (a good thing), you are necessarily excluding other body types and, if you are doing RTW, you must use averages. The more general things become, the less fit specific they will be.
Why Inclusive Isn’t Necessarily Synonymous With Fit For You
As designers and companies have sought to be more size inclusive, they have expanded the number of sizes offered, but the sizing is still based on averages, and usually, an hourglass figure type. Without knowing the basic measurements they are starting from, it is hard to know if their sizing is going to fit you. Test knitting offers opportunities to see fit on different body types, but without knowing the person’s measurements and body type, it is not as revelatory as it seems.
Designers
When I or anyone is designing RTW we have no idea what your needs are. Further, I don’t know what your body type is, what your specific measurements are, how you like things to fit, or, even, what yarn you will be using! There is no one answer. No one can make choices that will make it fit everyone. If you are a designer, you can give knitters enough information to make their own fit decisions when using your pattern, but your job is not to provide a couture fit.
Knitters
If you are a knitter, you need to know your measurements, and your own body (or that of the wearer), and your personal preferences. You are choosing the yarn, the size, and ultimately whether or not you make any personal adjustments. You should understand that the designer is designing to averages. You might like to join me and others on the last Wednesday of every month for the Fit Clinic.
Fit for All
Our quest for universality throughout the fashion/clothing/garment and related craft industries gives us fit for none, but has given us low out-of-pocket prices. The result is lots of stuff, but not always the “best” stuff.
Fit has to be a dialogue among all the things: design, preference, measurements, yarn/fabric, bodies, and among all levels of the industry.
Ha, Ha, Now Let’s Look At Unequal Divide
The complexity of this is why I love design and grading. On the other hand, the complexity is the worst part of design and grading!
See the next blog post for more!




Point 4 was a missing piece for me on the unequal divide – the impact on the underarm and sleeve cap! Thank you, Jill for these broad strokes and helping us all understanding RTW and culture better!!
I decided to punt on that a bit because that is where it can get so tricky. I do speak a bit about it on the third blog, but I don’t want to throw a lot of stuff out that will scare people off. 🥰